Easy-JTAG Very HOT Update. v1.9.0.5 - KMVTU000LM REPAIR even totay dead emmc :)

Easy-JTAG Very HOT Update. v1.9.0.5 - FIRST IN THE WORLD!

NO ANY ADDITION ACTIVATION, NO ANY ADAPTERS.
LIKE USUALLY all hotest solution come free for all z3x users, 10years on market!!!
Hope z3x users will repair today all bricked EMMC

After 6month of playing with EMMC we have new solution for you:

- KMVTU000LM-B503 [VTU00M] REPAIR
- READY CONDITION TIMEOUT ERROR REPAIR
- OCR READY TIMEOUT [EMMC BAD] REPAIR
- TOTALLY DEAD 00FF8080 REPAIR

This solution can repair 90% dead KMVTU000LM-B503 eMMC.

For work with solution you just need connect 1 MAGIC Z3X-TP for force EMMC firmware emmc mode.

Testpoint Location:

HERE is step by step repair with screenshots!

Here is Repair Manual:

1. Download latest Easy-Jtag install
2. Identify eMMC:
LOG:
OCR READY TIMEOUT [EMMC BAD]
Done.
3. Disconnect eMMC from power lines and easy-jtag box connector
(disconnect eMMC from box is important, because some voltage leakage via CMD, CLK, DAT0)
4. Make short testpoint [TP] to [GND] (solder small wire)
5. Plug eMMC power and connect Easy-Jtag box connector
6. Remove short [TP] to [GND]
7. Identify eMMC
LOG:
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000, S/N: 537986854
8. Start Custom Operation ->'SAMSUNG: eMMC Update Firmware'
9. Confirm eMMC Part Number 'KMVTU000LM-B503'


LOG:
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: XXXXXXXXXXXXXXXX, ,FW Ver.: 01.52
CMD Pullup Level:2052 mV
CMD Active Level:2588 mV
Setup firmware normal update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSDfrom backup!
Please don't forget to configure BOOTsizes!
Done.

Now eMMC is alive !!! Enjoy!!!


P.S. COPY PASTERS - time for copy our solution. time to wake up
P.S2. Z3X users - we have lot of news for you in nearly future, be ready .

Attached Thumbnails

   

 

7 April 2014 - Micro-Box Imei V1.0.0.4 : LANIX FULL SUPPORT + MORE

---

7 April 2014 - Micro-Box Imei V1.0.0.4 : LANIX FULL SUPPORT : FREE

#1 CHECK IT HERE =>#1 SUPPORT WITH VIDEO TUTORIALS !!!  


#1 CHECK IT HERE =>#1 REALTIME update of SUPPORTED MODELS list ! INCLUDED VIDEO LINKS !

 
  MICRO BOX V2.0 THE BEST MULTI PLATFORM UNLOCKING TOOL ! - MICRO-BOX FULL ACTIVATED















 

VolcanoBox 3.0.0

VolcanoBox 3.0.0 Adjust Nokia 225 & adjust Mtk android Factory file write

---

VolcanoBox 3.0.0

What New?

• Adjust the Nokia 255 read information.
• Adjust the Nokia 255 read flash.
• Adjust the Nokia 255 write flash.
• Adjust MTK6572 to write factory file ( Emmc )
• Adjust MTK6572 to write factory file ( nand )
• Adjust MTK6577 to write factory file ( emmc )
• Adjust MTK6577 to write factory file ( nand )
• Adjust MTK6575 to write factory file ( emmc)
• Adjust MTK6575 to write factory file ( nand )

!! ...Important Notice... !!

Quote:

We need Complete Bug Reports. if you encounter any please post it here with very complete details & nicely describe. or send to laxmi kamlesh by Pm. This is very important for us to solve all bugs from Volcanobox. Please don't post useless or Un-Complete reports. Thanks you in advance.

Important note:
Only Volcano Module exe will not able to run. You have to Extract/Copy Volcano Module update files into Volcano YellowStone folder to able to Work fine !! 

 

How_to_Copy_Module_Files_into_YellowStone

http://gpgindustries.com/download/VolcanoBox/VolcanoBox/Volcano_YellowStone_%28BaseFiles%29/how_to_Copy_Module_Files_into_YellowStone.gif

To Download VolcanoBox YellowStone 

http://download1118.mediafire.com/4lk77ug5xqgg/qjo0crn2kj2b1e4/VolcanoUtility_v2.8.3_Volcano+Yellowstone.rar 

To Download VolcanoBox Module  

http://download2047.mediafire.com/xa9t67ifd4jg/3sbzjy7v7l617jw/VolcanoUtility_v3.0.0_Volcano%2520Module.rar